Roberto Posted October 20, 2013 Report Share Posted October 20, 2013 Hello I just bought a used Mambo Frog and have spent some days getting to know it. Think I have come quite a long way as I am not a light guy myself. Now I have a fixture here that I have a problem with. It is a RGB LED Par from unknown make. It has six channels: red, green, blue and some beamshapes (strobe e.g.). I have configured a fixture file and loaded it. My problem is that there is no brightness control. So even with the master fader off the leds remain on. So I thought I will program the R, G and B attributes as Brightness controls, but only one brightness parameter is permitted. Who knows a workarpound for this ? I imagine I am not the first to encounter this situation but was not able to find a solution on the site or forum yet. Any help will be much appreciated. Thank you R Quote Link to comment Share on other sites More sharing options...
PeterV Posted October 21, 2013 Report Share Posted October 21, 2013 R See Fixture Editor User Guide page 5 = "Virtual Intensity" which will act as a master intensity even if you don't have one. If you don't have this document, let me know and I will forward it to you. Peter Quote Link to comment Share on other sites More sharing options...
mikeb Posted October 21, 2013 Report Share Posted October 21, 2013 R I have a similar LED parcan and the RGB need to remain as Colours. This, as well as the virtual intensity should be what you need. I use my parcans on my old Alcora desk but will have a look at the generic fixtures in the latest global fixture template (gft) file and if I can't see one suitable, I'll try to create a fixture file for you tonight. You can then take a look to see how it's put together for future reference. Mike Quote Link to comment Share on other sites More sharing options...
mikeb Posted October 22, 2013 Report Share Posted October 22, 2013 R Not sure if I remember my DMX channels correct but I have created a fixture file. DMX 1 - R, DMX 2 - G, DMX 3 - B, DMX 4 - Fixed Colours, DMX 5 - Strobe and DMX 6 - Macro (Sound to Light?) When loaded, I believe you should see a virtual dimmer in the Beamshapes section. Let us know if you have any problems. Regards Mike Generic.ift Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.