Problem With 7.6.0 On Leapfrog96

[jimbo-nomads]

After upgrade to 7.6.0 whenever I take any slider up & down to zero that channel will never turn back on in any cue even if it was programmed.

 

Only fix is to power off & back on.

 

Any ideas?

[jimbo-nomads]

IS this really the only occurrence of this problem?

 

Can anyone give me a clue as to what the problem is?

[Jon Hole]

Hi,

 

When you take a channel up and then bring it back down, you've put '0%' into the programmer, so submasters and memories can't affect that channel until you clear the programmer (the programmer always wins!).

 

Press the clear button, and then your submasters and memories should work fine?

 

Regards,

[jimbo-nomads]

Hi,

 

When you take a channel up and then bring it back down, you've put '0%' into the programmer, so submasters and memories can't affect that channel until you clear the programmer (the programmer always wins!).

 

Press the clear button, and then your submasters and memories should work fine?

 

Regards,

Jon,

 

Thanks for that, I'll try that next time I'm at the theatre (Next week).

 

Would pressing the clear button after an update solve my other problem of an update not always working?

 

Thanks,

 

Jim

[Jon Hole]

Would pressing the clear button after an update solve my other problem of an update not always working?

 

Almost certainly :-)