Jump to content
Vari-Lite Controls Support Forum

Mac 500 Lamp On Macro


WillFeasey

Recommended Posts

Hiya,

for some reason I'm having trouble persuading some mac 500's to lamp on from the desk without using the parameter wheel. I've tried entering both the dmx value of the lamp on command (BEAM 230) and also the percentage value (BEAM 90) to no effect.

I want to create a macro to lamp them on to make the process speedy and precise (something which the parameter wheel is not).

What am I doing wrong?

thanks,

Will

Link to comment
Share on other sites

  • 8 years later...

Hello,

To Lamp On the Mac 550, select the fixture, and tap "Beam" to go to the Beam controls. Then dial the "Shutter, Strobe, Control" parameter until you reach "Lamp On". If you are on a FLX range console, you can tap the middle encoder button of the "Shutter, Strobe, Control" parameter, and then choose "Lamp On" from the touchscreen. If you wish you can then record a Beam palette, to give you a shortcut to the Lamp On command.

Hope this helps,

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

  • 2 weeks later...
On 5/4/2021 at 2:47 PM, Edward- Z88 said:

Hello,

To Lamp On the Mac 550, select the fixture, and tap "Beam" to go to the Beam controls. Then dial the "Shutter, Strobe, Control" parameter until you reach "Lamp On". If you are on a FLX range console, you can tap the middle encoder button of the "Shutter, Strobe, Control" parameter, and then choose "Lamp On" from the touchscreen. If you wish you can then record a Beam palette, to give you a shortcut to the Lamp On command.

Hope this helps,

Edward

Thks for your help. I'm on LeapFrog 48.

Ok to record on beam palette, but it's not possible on macro ?

To be honest, I had the command in my macros, but I don't know why, it disappeared ?

Link to comment
Share on other sites

Hello,

16 hours ago, Aniaki said:

Ok to record on beam palette, but it's not possible on macro ?

It is possible to record a macro of the fixture being selected, the custom beam palette being applied, and then the fixture being sent back to defaults again. You can then use this macro which will select and Lamp On your fixture.

16 hours ago, Aniaki said:

To be honest, I had the command in my macros, but I don't know why, it disappeared ?

The fixture macro for Lamp On for these particular fixtures is no longer included in the recent ZerOS Libraries.

If you have any questions let us know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

  • 1 month later...
Quote

 If you wish you can then record a Beam palette, to give you a shortcut to the Lamp On command.

Ok, but the procedure is to wait 5 seconds on LAMP ON for it to light up. How to proceed with the shortcut?

Quote

You can then use this macro which will select and Lamp On your fixture.

Before the macro disappeared, the procedure was simple, I selected the fixture and press"LAMP ON". I'm sorry but I don't understand how to create the macro?

Link to comment
Share on other sites

  • 2 weeks later...

Hello,

On 6/26/2021 at 7:20 AM, Aniaki said:

I'm sorry but I don't understand how to create the macro?

Fixture macros cannot be created. These are included in the Fixture Library, and are generated upon pressing "Automatically Create Macros" after patching your fixtures. If you wish to access the original version of the Mac 550 with the Lamp On macro, please see the fixture file below...

https://zero88.com/fixtures/legacy-library/Legacy library (gft41.0)/MARTIN/Mac 550.ift

Hope this helps,

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.