chw Posted April 15, 2013 Report Posted April 15, 2013 Hi, Thanks for the explanation of the ORB XF at the booth in Frankfurt!After the demo in Frankfurt I wanted to play a little with the Phantom OrbXF, but unfortunately I always get the message "Load Fixture Type failed". Please see the attached jpg for details This also appears starting other versions. Curios: It worked before! Ok., I always had the problem that I could not close the application, I had to "kill" it by terminating the process via task manager. I tried a lot to get it run, changed the installation path, run as admin, changed the directory in the settings, reinstalled the application, cleaned the registry (at least what I found) etc.Nothing works. The hardware and software I'm using is a Lenovo Thinkpad T400 with Windows7 32bit, everything with the default MS windows drivers and up-to-date regarding patches etc. Regards Christian PS: I updated the "real" LeapFrog48 yesterday to 7.6 and tested it - without any problems. Runs perfectly. Quote
Franck Posted April 17, 2013 Report Posted April 17, 2013 Hi Christian, We will have a look and get back to you. Best regards, Franck Quote
mikeb Posted May 23, 2013 Report Posted May 23, 2013 I have a similar problem that I am unable to run PhantomZerOS 7.6. I've installed it on my Win7 computer and also my Win8 laptop. Win7 - I open the PhantomZerOS program and see the option window to select a desk, etc. When I click Go, the Go button disappears and the screen flashes as if something tried to open but I am returned to the initial window but when I attempt to close it, what looks to be the desk console window attempts to open but then a windows dialogue box saying the program has stopped responding appears. I've removed the PhantonZerOS and re-installed it with no change to what is seen. Win8 - I open the PhantomZerOS program and see the option window to select a desk, etc. When I click Go, the Go button disappears and the screen flashes as if something tried to open but I then see an error message "Unable to execute file: C:\Program Files (x86)\Zero 88\ZerOS Remote Monitor\ZerOS Remote Monitor.exe. Create process failed; code 740. This requested opertion requires elevation.". On the plus side, my Fixture Type Editor and PhantomFrog work without any problems. Any thoughts? Mike Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.