Reading a Bullfrog show file & converting it to Solutions XL?

[Never_grew_up]

I have a client that wants to upgrade from a Bullfrog 48/96 to a Solutions XL. Can the current version of PhantomZerOS read a Bullfrog show file & make it Solution XL-compatible?

[Jon Hole]

You can load the showfile directly onto the Solution - just move it onto a USB drive and load the show on the Solution in the normal way.

[Never_grew_up]

Cool, thanks.

[Never_grew_up]

1 more question, if I'm going from a Bullfrog 96 to a Solution (Leapfrog 48) what happens to the 48 extra channels on the bullfrog that don't exist on the Leapfrog 48?

[KWR88]

In this case the extra channels are loaded as dimmer onto the fixtures section.

So dimmers 49-68 will be on fixture page 1, dimmer 69-88 on page 2 and dimmer 89-96 on page three. Any fixtures that were on the bullfrog then start on page 3 after dimmer 96.

 

I would then recommend you turn on the command line so you can control the channels easier with syntax entry.

 

Only thing of note is the output window shows only 48 channels plus your fixtures, it does not show dimmes 49-96 even when selected.

[Never_grew_up]

Awesome!, thanx