repair

[succa20]

I,ve got a jester ml24 to repair.All LEDs light up when switched on pse help.

[Jon Hole]

Hi Succa20,

 

What is the LCD display saying?

[succa20]

LCD only background light on no message

[Jon Hole]

First port of call would be to follow these instructions to replace the internal battery:

http://zero88.com/support/index.php?/Knowledgebase/Article/View/507/0/error-bad-product-id

[succa20]

How to do a full reset of the console

[Jon Hole]

go into SETUP / Super User (SHIFT + MODE), and then use the down arrow to select the option saying 'Reset Desk'.

 

Press Enter.

 

Select 'Yes'

 

Press Enter.

 

Regards,

[succa20]

1.I tried to do as you said using the instruction on the link you gave,for info the console is still not displaying anything on the LCD screen all LEDs are on.I removed the internal battery and insert it againSituation still the same i.e all LEDs on.

2. Another ML24 console a good one has the shift switch stuck and we have to give small taps on it several times for it to work.Can I change the switch,if yes can you give me the description of the switch so that I can buy one pse.

Thanks

[KWR88]

please can you PM on the address below to take this further.

If you could give me both the serial numbers for the desk so we can date the firmware and hardware they are using.

[succa20]

Ok Thanks will do as needed

[succa20]

ZERO88 jesterml24

qty 2

1.sno. 0011400 08100003(good one only some switches stuck on use)

2.sno. 0011400 07490024(all LEDs on no display )