codebone Posted May 11, 2012 Report Share Posted May 11, 2012 Hi all, I just installed the new PhantomZerOS v7.4 software on my Windows 7 x64 machine. I am trying to get visualization with capture running now. I enable citp transmitting on 127.0.0.1 (local loopback IP) and it begins to transmit. Then I start capture and The desk crashes. Capture is set to automatically select which network device to listen for data on. So I guess my question is, how do I setup visualization with capture using ZerOS (frog2 surface). Thanks Quote Link to comment Share on other sites More sharing options...
Jon Hole Posted May 12, 2012 Report Share Posted May 12, 2012 Hi Codebone, Have you had this working on any previous versions of Phantom ZerOS? What are your settings withing SETUP > NETWORK > CAPTURE? Regards, Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
codebone Posted May 13, 2012 Author Report Share Posted May 13, 2012 I hadn't tried on any other version besides 7.4. The settings on network > capture are "Enabled" and "127.0.0.1" for the IP address. On a side note, using the physical frog2 desk, capture detected the universes over Art-net but not citp. Quote Link to comment Share on other sites More sharing options...
Jon Hole Posted May 14, 2012 Report Share Posted May 14, 2012 Try changing the IP address in Phantom to 127.0.0.2 Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
codebone Posted May 17, 2012 Author Report Share Posted May 17, 2012 I can't change the IP address. It doesn't allow setting of an arbitrary IP, it only allows the selection of already existing network devices. Quote Link to comment Share on other sites More sharing options...
Kirkup_xp Posted May 17, 2012 Report Share Posted May 17, 2012 Hi Codebone, If you double click on the 127.0.0.1 in Phantom ZerOS, you should be able to select from other IP ranges on the PC - Phantom allows you to route the IP traffic from any of the Network Cards within the PC it's running on. 127.0.0.1 is the local loopback IP (also known as 'localhost') - it implies that the network card you have selected hasn't had it's IP address configured (maybe it's set to be allocated it's IP by DHCP, and no DHCP server is present on the network? or maybe it's disconnected from the network?) Phantom ZerOS, unlike the real desks, doesn't allow configuration of the IP address of the device itself - you'll need to use the Windows control panel tools to alter the IP configuration, then restart Phantom ZerOS. Note that in order to connect to a visualiser, you do need an Ethernet connection active - you can't just use the loopback, even if Capture is running on the same PC. I hope this helps, Peter Quote Peter Kirkup Link to comment Share on other sites More sharing options...
Uriahdemon Posted June 11, 2017 Report Share Posted June 11, 2017 Hi Codebone, If you double click on the 127.0.0.1 in Phantom ZerOS, you should be able to select from other IP ranges on the PC - Phantom allows you to route the IP traffic from any of the Network Cards within the PC it's running on. 127.0.0.1 is the local loopback IP (also known as 'localhost') - it implies that the network card you have selected hasn't had it's IP address configured (maybe it's set to be allocated it's IP by DHCP, and no DHCP server is present on the network? or maybe it's disconnected from the network?) Phantom ZerOS, unlike the real desks, doesn't allow configuration of the IP address of the device itself - you'll need to use the Windows control panel tools to alter the IP configuration, then restart Phantom ZerOS. Note that in order to connect to a visualiser, you do need an Ethernet connection active - you can't just use the loopback, even if Capture is running on the same PC. I hope this helps, Peter Hi Peter, I also have the same problem with Capture but do not know what you mean by ''Note that in order to connect to a visualiser, you do need an Ethernet connection active - you can't just use the loopback, even if Capture is running on the same PC'' could you help please....?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.