3D software?

[BassTool]

Is there a 3D software programme compatible with the Jester where we could create our show on a PC screen by mimicking our fixtures and positions in a 3D view complete with the correct footprint size of our show?

 

ie back truss and front truss and same spacings of fixtures etc?

 

http://www.thedustytools.com/13.html

 

Scroll to the bottom to see our set up.

[Kirkup_xp]

Hi There BassTool,

 

There are a number of 3D simulation software packages out there - most of them offer a DMX Input box which you can feed the DMX Output from your Jester ML24 into, to mimic the behaviour of the lights on stage. If those packages don't support a DMX Input box, you can use a DMX-Ethernet box (like our 1 Universe Ethernet Box) to convert the physical DMX into Ethernet signals, which the simulation software can then use to determine the look on stage.

 

Check out:

www.cast-soft.com

www.capturesweden.com

 

I hope this helps,

 

 

 

Peter

[BassTool]

Hi There BassTool,

 

There are a number of 3D simulation software packages out there - most of them offer a DMX Input box which you can feed the DMX Output from your Jester ML24 into, to mimic the behaviour of the lights on stage. If those packages don't support a DMX Input box, you can use a DMX-Ethernet box (like our 1 Universe Ethernet Box) to convert the physical DMX into Ethernet signals, which the simulation software can then use to determine the look on stage.

 

Check out:

www.cast-soft.com

www.capturesweden.com

 

I hope this helps,

 

 

 

Peter

 

Thanks for that Peter!