Moving light - colour flickers between colour changes

[hansdev]

Good day. I'm using two Elation Power Spot 250 and 3 High End Studio Color 250. When I'm finally done programming my sequence for a song, I adjust the LTP Fade to "0". I would assume this would give me a quick transition from one memory to the next. I still have a slight visibility of the light going say from blue to red. How can I make the transition so they are not noticeable. Thanks.

[GLX]

As your colour wheels move your going to see it! unless you set your units to dark while moving, in which case the shutter will close while the colour wheels move or your unit repositions.

The only way out of it is to use some other unit ie pars as fills while the heads change colour.

[K-Nine]

GLX is right, the desk will snap the DMX output values from one colour to the next, but most fixtures will still take a finite time to react to the change in value and move the colour wheel to the new value.

[ice]

And make sure your parameters are set to "snap" instead of "fade". If you notice some slow movement when that's the case: slow fixtures