Jump to content
Vari-Lite Controls Support Forum

Lanta Laser fixture type editor


singingtooth

Recommended Posts

Hi guys

 

I have recently bought a few Lanta Lasers:

 

Lanta Blazar Sapphire 500

http://lantalighting.com/assets/handbook/J84794%20Blazar%20Sapphire%20500%20Handbook.pdf

Lanta Blazar UV Pink

http://www.djkit.com/documents/J64989%20Blazar%20UV%20Pink%20Handbook.pdf

Lanta Quasar G50 Micro

http://www.etsnet.co.uk/wp-content/uploads/2010/10/Quasar-Micro-G50-Handbook.pdf

 

I'm using the fixture type editor but need some help.

I think on all the lasers, channel 1 (Operations mode) is the primary dimmer (Brightness)

The rest of the channels, do I use Beamshape for all of them?

 

I've attached what I've done but would really appreciate someone having a look at the file to see if I've done it right.

 

Cheers all

Lanta.ift

Link to comment
Share on other sites

  • 1 month later...

Hi,

 

It's up to you which parameters you put into each attribute.

 

However, putting them all into BeamShape will make programming quite slow for you, so I've made a few changes:

 

Blazar Sapphire 500 / Blazar UV Pink

- I've put HMotion, VMotion, HStretch, VStretch and Rotate into Position. This means there are then only two pages (2 x 3) of parameters in the Beamshape attribute, which will make programming much easier.

 

Quasar G50

- I've done very similar, putting X/Y/Z Rotate and H/V Motion within the Position attribute, and left the others inside Beamshape.

 

I hope this is helpful

Lanta (2).ift

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.