Visironer Posted September 29, 2011 Report Share Posted September 29, 2011 Hi, Trying to Add a "Home made fixture" in the Phantom Jester using a usb key...does'nt work ! Screen just say "no file found" Any way to use our "home made fixture" in the Phantom Jester (v3.1) Tkx Best Regards Quote Link to comment Share on other sites More sharing options...
KWR88 Posted September 29, 2011 Report Share Posted September 29, 2011 Tested this out and do not seem to have an issue loading fixtures into the phantom desk. Check the path to where it will search is correct in the settings menu. If you had it mapped to the USB port when a USB drive is plugged in make sure it is the same port the USB is generating when you plug it in now or update the path to drive match it. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com Link to comment Share on other sites More sharing options...
Visironer Posted September 30, 2011 Author Report Share Posted September 30, 2011 Thanks for your fast answer Havn't seen the setting menu ! Sorry -> works fine ! You can perhap's confirm that i can't use MACRO (fixture editor) with a Jester 24 ml ?! Regards Quote Link to comment Share on other sites More sharing options...
Kirkup_xp Posted September 30, 2011 Report Share Posted September 30, 2011 Hi Visironer, That is correct - you cannot use the macros from the fixture library on any Jester series' desk. These macros do get used on ZerOS desks. I hope this helps, Quote Peter Kirkup Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.