Problems with ParLite LED at Lightmaster XL

[Roger T.]

I have prolems with LED Equipment (as ParLite LED or StripLite LED) in the "Run"-Mode of a Lightmaster XL.

 

Independent of the DMX-Patch every Fader (if it's in the position between 80-100%) interrupt the previous Fader.

 

Example 1:

Fader1 Red (Fader @ 0%)

Fader2 Green (Fader between 80-100%)

Fault: Green LED's are on and the Red LED's are flickering a little bit

 

Example 2:

Fader7 Green

Fader8 "no DMX-Patch" (Fader between 80-100%)

Fault: the Green LED's are flickering a little bit

 

In the Preset-Mode and Program-Mode there is no Problem!

I have done the Reset and Factory-Reset routine.

 

Is anybody able to relate this? Is it a Fault of the Desk? If "Yes" in which Part is the fault (i have the Schematics)

 

Any Ideas?

[KWR88]

Not seen anything like this that only shows up in Run mode. Any sort of fader fault would show in preset, program and run.

 

Are you using the A preset live control in run mode or have you programmed the levels the B memory masters and repaly from there?

 

Please e-mail me back on the address in the signature below.