Multiple DMX Patching

[Daniel Sheehan]

Hi,

 

I am currently working with a Jester 12/24 on a production and after reading the Jester manual have determined that it is possible to control multiple DMX channels via. 1 Channel Fader on the desk.

 

Firstly is this a correct theory?

 

Secondly if this is possible could anyone tell me how to add another DMX Address to a channel in Super User? I am able to patch 1:1 but it feels like I have tried every button in attempts to add a second!!

 

Many Thanks in advanced

 

Daniel

[Kirkup_xp]

Hi Daniel

 

You're correct... all you need to do is go into Super User (hold down SHIFT and press MODE), then scroll to <DMX Patch>. Press Enter, then select the DMX address you want to assign to a channel. Once you've got that channel selected, press the flash button under the channel you want to assign it to. Continue doing this for each channel you want to assign. You'll notice as you scroll through 1-12 that the LEDs light on faders 1 to 12, etc. To remove an assignment, just press the flash button again.

 

I hope this helps - let us know how you get on!

 

 

Peter

[Daniel Sheehan]

Thanks Peter...

 

I think I was confusing 'Frog' logic onto the Jester which I have noticed over the past few days is much more different than I had perviously noticed having only used the console for small events.

 

Daniel