Jimlad Posted August 23, 2010 Report Share Posted August 23, 2010 Hi, Have recently acquired a Jester 12/24 (updated to Vers 3.4). Seems to function perfectly, as does Phantom Jester (vers. 3.1) running on Vista. Jester will save, load and erase ok, as does Phantom. But I cannot save on one and load to the other. It simply says "No Shows on Disk", if I save on Jester and try to load onto Phantom and vice versa, even though this is not the case. Quote Link to comment Share on other sites More sharing options...
Jon Hole Posted August 23, 2010 Report Share Posted August 23, 2010 When you first open Phantom Jester, click settings, and then Browse to your USB as the 'local' drive. You'll probably find at the moment it is saving, and trying to open, files on your local hard drive instead of the USB. As the Jester doesn't have support for multiple directories at the same time, you have to change it here first. Hope this helps. Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
Jimlad Posted August 23, 2010 Author Report Share Posted August 23, 2010 Hi Jon, It worked. Many thanks. Saved me hours of pondering. Regards, Mike Quote Link to comment Share on other sites More sharing options...
Jon Hole Posted August 23, 2010 Report Share Posted August 23, 2010 No problems, glad we were able to help! Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.