csylten Posted January 7, 2010 Report Posted January 7, 2010 When I use the offset function the offset is shown in the display as 0-100%... BUT, when I use the shift button at the same time to "fan the offset", I cant read the % of the offset. why?? If I have 4 MH's and put them in 25% offset in fan mode, I have to look at the fixtures to know when they are "about" 25%. and... Is there an "auto-offset" function yet? ex. if I use 4 fixtures in an effect, and I want them to be set to the "perfect" offset for number of picked fixtures, 25%. Insted of manualy press shift, turn the wheel to 25% (if I can see when I reach 25% ofc.), I just set the effect, and press "auto offset", and the frog will do (100% / 4 fixtures = 25% offset) . . . ? Quote
Kirkup_xp Posted January 25, 2010 Report Posted January 25, 2010 Hi Csylten, The reason you don't see the values change is because your fan rule is set to Fan First - in this mode, the 'first' fixture is a fixed point and therefore you don't see the fan from that point onwards. I generally select fixtures individually when fanning and set their fan values as required, using simple maths - I know this falls down when you have a large number of fixtures, but for 3,4,5,6 fixtures it's pretty easy to do. We don't yet have an auto-fan function but this is something we've been asked for a few times so i'll add it to our feature request list. I hope this helps clear things up, Peter Quote Peter Kirkup
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.