Chauvet Techno Strobe RGB (ST4000RGB)

[Vista Tech]

Hi, I am new to the forum. My church just purchased a Jester ML48.

 

I need a fixture personality file for a Chauvet Techno Strobe RGB. Here is a link to the manufacturer's manual.

 

http://www.chauvetlighting.com/products/manuals/ST-4000RGB_UG.pdf

 

I need to set the fixture up to reverse the brightness values. The fixture defaults to 0 being full on and 255 being full off. From what I understand, a virtual channel could be used with an inverted output. Although I notice that the inverted output option can be used independently from the virtual option. Since the Chauvet Techno Strobe has a brightness channel, could my goal be acheived by just using the brightness channel with the invert output option and not bothering with using the virtual option?

 

Vista Tech

[Paul]

At the moment, the JesterML/TL software doesn't use the 'Invert Output' seting from the Fixture Library - however this is logged as a feature request for a future version, reference JES-2489.

 

If the RGB channels on your fixture work the *right* way up, then you can add a Virtual Dimmer to control their overall levels from the desk. In this case, set the fixture personality up so the *wrong* dimming channel on the fixture is called something else, default it to 0, and hide it away under Beamshape, remembering never to change it when you're programming.

[Paul]

Support for Inverse channels has been added in JesterML/TL software version 3.0, CLICK HERE for further details.