kah-bonn Posted August 12, 2009 Report Posted August 12, 2009 Hello everybody, I'm new to this forum, not sure whether this was posted before, but searching the forum i didn't find it yet. For a show last night i recorded one submaster (i'll call it A from now on, for better understanding) with about 30% intensity into another one ( B ), with some additional other dimmer channels. Now when i had B at full and wanted to increase A it would first go through black and then increase, as if it was not part of B at all. If i faded out A it would fade out completely and, as soon as the Fader was at 0%, the intensity would go up again to where it was from Fader B. I run the desk in HTP and with smart tag turned off and even changed desk into LTP, but the problem was still there. Please let me know what i can do to prevent this. Thanx, Fabi Quote
Kirkup_xp Posted August 17, 2009 Report Posted August 17, 2009 Hi Fabi Do you have a show file for this situation? It sounds unusual - I'd like to try and recreate it here to work out what is going on. Kind Regards, Peter Quote Peter Kirkup
kah-bonn Posted August 23, 2009 Author Report Posted August 23, 2009 When i wanted to record the showfile the problem was gone. Maybe restarting the desk did the trick. Anyway thx for ur quick response, greetz Fabi Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.