dappa Posted January 8, 2004 Report Posted January 8, 2004 ok I know that my previous Question did NOT make any sense what so ever. so let me try and explain a little bit better bare with me please. Im trying to set a squence without having to save 10-15 scenes. I would like to have my robotics move in squence yet flash one by one ..but heres the tricking part ...i would like to save all this onto a submaster... PLEASE TELL ME THIS IS POSSIBLE . AND also is it possible to set wheels at fixed values such as[(b] ;wheel 1color... wheel 2 pan wheel 3 tilt':D') cheers again D.[/b] : : Quote
ice Posted January 10, 2004 Report Posted January 10, 2004 Create a chase by holding the "type" button, it will go into chase mode. Then record each step by pressing program. The chase is now stored in your memories, and can be transferred to a submaster by "transfer no time". That should be all I think! Quote > 500 posts, time for a new T-shirt?
nickb12345 Posted January 14, 2004 Report Posted January 14, 2004 With regards to creating the custom fixture, Download the Frog Fixture Editor from the Z88 website. Create your fixture in this (on your PC) then load it onto your desk with a floppy disk. Hope that helps. Nick Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.