miclight Posted July 26, 2009 Report Posted July 26, 2009 I have a Leapfrog 96 (about 2 years old) and it is stuck at the Load Show screen.... "Loading...." The USB key is not in the console I have no DMX control and no menu navigation on the console however if i bring up the sub groups they seem to activate (still no dmx control) I also know that the go button works as i have a couple cues that trigger macros to run a chase on a sub group and when i hit the go button the subs activate Any thoughts? Of course like any technology that you don't have a backup for it went out on us before our sunday morning service (it worked just fine for saturday night) So i really need help getting to to work before next weekend I was planning on upgrading but now I am a little nervous to do it with the current state of the desk. Current Version 4.4.4 Quote
Kirkup_xp Posted July 29, 2009 Report Posted July 29, 2009 Hi Mike I think we've been speaking about this via email too. It sounds like somehow your show file has become corrupted - if you boot the desk up with SHIFT held down on an external keyboard, you will get into a boot menu which allows you to clear out the current showfile and therefore get the desk booting again. Alternatively upgrading the desk software will also clear the show file. Upgrading in this situation should be problem free. I hope this helps, Peter Quote Peter Kirkup
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.