joolsclinn Posted May 22, 2009 Report Posted May 22, 2009 Hi, I have programmed a chase into a submaster. When I go to run mode and activate the sub, it only outputs the first step. If I turn the chase speed down to click off, the up again, the chase starts up. Is this correct??? Best wishes Jon Quote
Kirkup_xp Posted May 22, 2009 Report Posted May 22, 2009 Hi Jon The speed of the chase is stored along with the chase steps - if you go back into Program mode, select a step and set the speed you require, then when you overwrite the step (by pressing the PROGRAM/GO button and selecting <Overwrite>), the chase will output at the speed you have defined. I hope this helps, Peter Quote Peter Kirkup
jw-lighting Posted June 2, 2010 Report Posted June 2, 2010 Did this actually mean, i can programm the time the console is waiting before going to the next step for each step seperatly? That would be really great Quote
Kirkup_xp Posted June 3, 2010 Report Posted June 3, 2010 Hi jw-lighting, No unfortunately this just is the way you set the overall speed of the chase. I hope this helps, Peter Quote Peter Kirkup
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.