Carwyn Posted April 15, 2009 Report Share Posted April 15, 2009 hi i was showing film today and had the leapfrog on for house lx and tabwarmers etc. during the film when all channels was on 0% and about half way through the film i had a random flash. i have a dmx line to the dimmers plugged in to dmx 1 out and a dmx line down to stage in dmx 2 out with this line neot connecting to anything and on. the output screen on the desk did not show it outputting anything can anyone shead some light on it for me please. carwyn Quote Link to comment Share on other sites More sharing options...
NZ Posted April 16, 2009 Report Share Posted April 16, 2009 Hi To start with can ask lots of questions. Was it both lines of DMX that flashed? What dimmers where you using? Are the lines terminated? Have you ever seen this before with the desk? Best Graham Quote Graham Link to comment Share on other sites More sharing options...
Carwyn Posted April 16, 2009 Author Report Share Posted April 16, 2009 hi i had some problems with a different cable some time ago i have permus D54 dimmers witch go through a dmx - D54 converter whitch i dont think theres a termination point before the through out. The other Dmx line goes from the DMX output 2 down to stage and it has has no termination point on it. hear from you soon Carwyn Quote Link to comment Share on other sites More sharing options...
Carwyn Posted April 19, 2009 Author Report Share Posted April 19, 2009 hi again i've just noticed that the dmx out seems to be losing power briefly as i've used 2 separate cables in the desk and connected it to 2 seperate dimmer packs and coming out of the 2 different dmx out on the desk and that my findings show that the power on the dmx out on the desk is failing and causing it to do funny things i.e. flashing lights. any ideas PLEASE HELP ME Carwyn p.s. is there a desk based test i can do to support my theory Quote Link to comment Share on other sites More sharing options...
KWR88 Posted April 20, 2009 Report Share Posted April 20, 2009 Hi Carwyn, There are a couple of things that we can look for. It would be easier if I e-mail you off line. If you could send me an e-mail to the address below giving me your desk serial number I will talk you through what we need to be looking at. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.