robo 812

[masonpendrey]

Hi Peter

I have come up with a problem on my Leapfrog 48.

I have been using 12 Roboscan 1220 iir/ 4 Mac 500/ 2 Roboscan 812.

When i set them up on the desk, it let me load all the fixture fine.

And I could control them all,

I then started to set up my palettes all worked fine till I did the 812s, I could not get then to replay after recording them to palettes all the others worked fine .

I then tried to record them to submasters and they would not replay there either.

Is it something I am doing or is it a problem.

many thanks Mason

[Kirkup_xp]

Hi Mason

 

This is a feature of the Smart Tags functionality on the desks. With Smart Tags enabled, if the shutter channel is at 0% the desk won't store any information about that fixture (it assumes that Shutter = 0 means the fixture is in blackout). The easiest thing to do is to modify the Default value for Shutter to 1% in Edit Fixtures and then storing the scenes will work as expected.

 

I hope this helps,

 

 

Peter

[masonpendrey]

thank you Peter worked a treat.

mason