WeirdProfessor Posted March 5, 2009 Report Share Posted March 5, 2009 Hi guys I'm using a Leapfrog96. Had a show the other night where I used all 96 faders, but needed six more. In the 96 channels, six of them was front lights, so I recorded them on a submaster and thought I could just repatch and change the front faders to the ones I needed. But when I'd patched them, the submaster recording didn't do anything. When I press "Program", doesn't the desk record the current dmx-addresses? didn't expect it to care which fader I used.. Bo, Scenelys.dk Quote Link to comment Share on other sites More sharing options...
Kirkup_xp Posted March 5, 2009 Report Share Posted March 5, 2009 Hi Bo No, the desk records *channel* levels when you press Record. The way I would have done this is to multiple-patch one fader to 6 outputs, using Edit Fixtures, Patch... press the "Add" button and add a new DMX address to the channel selected. I hope this helps, Kind Regards, Quote Peter Kirkup Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.