Kresten Bager Posted April 20, 2008 Report Posted April 20, 2008 Hi all, Great job on the version 3 software - just testing it now. And now an idea: It would be nice to be able to space fixtures when patching. E.g. our movers use 28 DMX channels but I always patch them in 30 intervals - i.e. 100, 130, 160 and so on. So when specifying the universe and starting address it would be nice to be able to add 'spacing'. E.g. adding a spacing of 2 would solve my patching 'problem'. The spacing value should default to the number of channels the fixture uses - 28 and then the user can increase the number to 512-(start chan+spacing). Best regards Kresten Quote Kresten Bager Polyteknisk Scenelys www.scenelys.dk
Kirkup_xp Posted April 20, 2008 Report Posted April 20, 2008 Hi Kresten Thanks for this suggestion - this is something we've talked about already so i'll flag your comments up with R&D. For now, either editing the patch or patching individually will make this simple, alternatively you could create a custom fixture with a higher DMX Allocate and patch this. Peter Quote Peter Kirkup
hwell Posted April 5, 2009 Report Posted April 5, 2009 Hello, Is it possible to patch multiple fixtures at once, on every 30st DMX adress? So lets say Mac250 entour 1 on channel 1, next one on 31, next one on 61 and so on? It's easier than to count it out exactely each time. Thanx in forward EDIT: Sorry for my double post... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.