Non-Dim

[Kirkup_xp]

Hi there

 

Unfortunately it is not possible to do this on the Bull frog. You can create a fixture profile which controls a particular DMX address, however fixtures are treated Latest Takes Precidence so moving a wheel or playing a memory that contains that fixture will adjust it to whatever level has been requested.

 

What is it that you're trying to achieve - there may be a simpler way using the memories on the chilli dimmer, if you don't need remote control from the desk.

 

 

 

Peter

[A Man With A Lighting Plan]

Hi

It's not necessary, per se, but for the future it will be very helpful. I am trying to use my BF to control certain things that we otherwise have to plug into 13A sockets, such as our mirror balls, UV cannons, and other things that have to take On 240V or Off.

Thanks

Adam.

[Kirkup_xp]

You can purchase a relay rack, such as our Switch 6, which does exactly this and responds to a normal 'dimmer' channel. This will give you true 230v supply, rather than going through a dimmer which still has a chopped waveform and may cause you problems with certain types of load.

[A Man With A Lighting Plan]

What happens to the waveform? Do you have any images I could compare so I dont have to dig out my 'scope?