Betapack 3 first two channels

[sicole]

We have 1 x Betapack3 thats playing up. Unfortunately the customer is 35 miles away and dont relish the prospect of going there to find its goosed and have to go there again to replace.

 

Symptoms are:

 

Channels 3 and 4, 5 and 6 work as expected

Channels 1 and 2 are not working at all either through DMX signal or though the manual control on the pack

 

The linking bar is my first point of call,

 

Is there anything else I should be looking for when on site?

 

Cheers

[KWR88]

I think I spoke to you about this and the problem has been solved.

If not please contact me on keith.rogers@cooperindustries.com

[gjk513]

Sorry for hi-jacking this thread but as i have an identical problem and thought I would keep the topics contained. I have no channel 5 and 6 on my Betapack. I have tried resetting the linking bar, checked the switches are on and flashed the channels manually is there anything else I can try?

[soundesk]

Hi I have the same problem with channels 5/6.

Wot was the out come?

[KWR88]

Can you pm me on the address below, with the dimmer serial number and I cna go through some things to check.