04s2lao Posted February 14, 2008 Report Posted February 14, 2008 Ive recently managed to get my hands on a old Lightmaster XL. (Make your own mind up if thats a good thing or not!) After replacing the internal batteries and a bit of testing confirming the thing was actually working, i noticed a niggling little problem. The green status LEDS above the 12 sliders don't light!! The odd thing is the yellow LEDS beneath work...... Anyone heard of this problem before? Or even better know what i need to do . Admittedly its not really that important the green LEDS work. Its just annoying and i was assigned the job of fixing it. (Part of a group) So i want to do a thorough job. Quote
KWR88 Posted February 20, 2008 Report Posted February 20, 2008 The green LED are take direct from the analogue outputs. It would indicate a problem with those as well as there are few faults that would stop the LED from working but leave the anaolgue output operating. Please e-mail me on krogers@zero88.com to continue as it will be quicker. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com
04s2lao Posted April 9, 2008 Author Report Posted April 9, 2008 Thanks very much - Fixed the problem For those of you who care: We had to replace a transistor, and 3 logic chips. Also a single green led had died so that was replaced as well. Its working very well now and we are considering using the lightmaster as an effects board, to control mirror balls, smoke machines etc etc etc. Quote
Nodmoz Posted April 24, 2014 Report Posted April 24, 2014 Don't suppose you have any further information on this problem? I'm having the same issues! Quote
KWR88 Posted April 25, 2014 Report Posted April 25, 2014 Hi PM on the address below will go over somethings with you. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.