sicole Posted January 19, 2008 Report Share Posted January 19, 2008 Not even sure how and when this happened, came to the show yesterday, in the memory stack there is memory number 9 (a directly programmed chase). Fade up time is 0.0 sec, fade down time was 0.0 but is now non existent. Also, this memory is copied to a submaster. That had the same fade times. Erring on the side of caution I bypassed this in the show. After the show, tried it and once that memory or sub is outputted, you cant get rid without deleting. Any else seen this and how can you program in a fade down time when it displays nothing in the column? Off now to the show and to reprogram the chase Cheers Si Quote backSTAGE Theatre Supplies LTD Specialists in Lighting / Staging / Consultancy Link to comment Share on other sites More sharing options...
Kirkup_xp Posted January 21, 2008 Report Share Posted January 21, 2008 Hi Si This isn't something i've seen before - can you email me a show file? pkirkup@zero88.com Thanks Quote Peter Kirkup Link to comment Share on other sites More sharing options...
K-Nine Posted January 21, 2008 Report Share Posted January 21, 2008 I wonder if this could be related to the problem you posted re submasters with transferred memories which lost their name and fade times on power cycling the desk ? I will do some testing here and see if I can reproduce the problem. Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace Link to comment Share on other sites More sharing options...
sicole Posted January 21, 2008 Author Report Share Posted January 21, 2008 Yes, certainly could be related to that. I dug a bit deeper on Saturday night and the fade down on that memory was nothing, hence transferring it to the sub would replicate the problem, but as I run through the memory stack, the tracking eliminates this. I cannot be certain but I am sure it had a fade down time of 0.0 at the start of the week. Other chases I programmed at the start of the week had the same properties and were fine. The only thing I changed on the setup was the flash/solo setting to try and get it to solo the chase but that didnt work as I found out from a previous post! Peter - I cleared the desk on Saturday so unfortunately do not have a show file. Thanks for your help Si Quote backSTAGE Theatre Supplies LTD Specialists in Lighting / Staging / Consultancy Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.