Desk Channel

[Thomas Haaser]

Hallo Zero88,

 

during the work with LeapFrog 48 I`m annoying the following function:

 

if you adjust the dimmer values over the dimmer fader, they will be sent to the output actively. But the question is:

Why are they resetted during reset of program (clear-button) while the faders resist at their positions?

 

Wouldn't it be better if the dimmer-output fits to the fader-settings and only the changed dimmer values (optional all of them) are tagged?

 

Further it would be nice to have the possibility to set the the ip-address and subnetmask manually.

 

I would be appreaciate about an answer!

 

Bye

[Kirkup_xp]

If you switch the faders into "HTP Mix" mode in Setup/Desk Setup/Behaviour/Preset Mix Mode, you will find that they stay on even when the programmer is cleared The only thing to watch in HTP mix mode is the fact that you can't "grab" a level to bring it down, and instead must either use command syntax or selecting the channels to edit their levels (set the Flash Mode to "Off/Select" and press the preset flash button to select the channel, then use the fixture wheels to adjust the dimmer).

 

I generally leave my preset faders in LTP Mix mode for programming, but switch to HTP Mix during playback as this means I can manually add channels without activating the programmer (and hence the Clear LED)

 

We are expanding the ethernet options immensely in the next release of software, and I imagine that manual IP address settings will become part of this update.

 

I hope this is of help to you.