Run A Chase From Submasters

[dogcop]

Hi there

I have a sunstrip active- basically 10 halogen blinder effect in one.

 

I have created a chase whereby 1st 2 lights come on, then off and 3rd and 4th come on etc etc - and this chase runs ad infinitum.

 

When i run it from the memory stack it works every time.

 

I have transferred it to the submasters and tried both with and without time.

 

However every time I run the chase from a sub the 1st 2 lights come on and thats it - no chase

 

I go back to memory stack again and all works fine

 

Any ideas ????

 

 

Andy

[Kirkup_xp]

Hi Andy

 

Do you have a speed set on the chase? or are you manually overriding it using the speed pot?

 

Do you have a show file you could email me, with the problem submaster? pkirkup@zero88.com

 

Also, what software version are you running - this could help us find out if this is an old bug which may have been fixed in a later version.

 

 

Thanks

[dogcop]

Hi Peter

 

I have now mangaged to solve the problem

 

Normally when I run subs, i just press the button underneath the fader hence the no chase!!!

 

Push up the fader and voila - mucho embarresssment

 

note to self - try the leedin obvious first !!!!

 

thanks for your time tho'

 

Andy