Output "View" for Fixtures

[pollywog]

Bullfrog 10.8; fully Partial mode,

 

Situation:

96 generic channels; 24 Movings

need to store Memory, Submaster, Pallette. partial.

pressing Output, to see whats going out of the desk

pressing shift (oldname: whelgroup)

--> get an information what to be stored partial about:

96 generics

but only about one Fixture :-(

and the fixture only in DMX-Values / Pxx (xx = Palette) number.

 

 

 

Suggestions

1)

I need an Overview about all 24 Fixtures and Parameters

1.a)

--> Additional Output View with 25 x 24 Matrix about Fixtures:

e.g.

 

 

POS:

pan

tilt

speed

focus

effect

sizex

sizey

speed

offset

rot

 

Beam:

...

...

 

Colour:

...

...

...

 

--> getting an Information pressing shift which parameter is not stored

showing "--"

 

 

 

2) as most of my pallets are named:

--> if fixture e.g. is on pallete P40 named with blue

--> display blue insteas of P40

[Paul]

Have you tried the fixture outputs screen? Hold down F1 and press a fixture selection button. That will show you the grid view that you're looking for.

 

Palette numbers are displayed Pxx rather than the name, because there wouldn't be room on all the screens for the palette names, since they can potentially be up to 18 characters long (if I remember correctly).