qwells Posted February 14, 2007 Report Posted February 14, 2007 Our new Church Building has a ChilliPro 2416 installed to illuminate our main worship area (MWA). I have programmed a number of scenarios into the 12 memories - whilst leaning at an angle in the cupboard :!: but I haven't fathomed the sequencer yet. There are a number of remote 10-button control panels installed, but it would be really useful to be able to dynamically adjust the lighting (outside the preprogrammed scenarios) - depending upon the activity in the MWA - from the technician's balcony. The ChilliPro is downstairs and the balcony is upstairs, what equipment would we need to be able dynamically re-programme the scenarios/memories? (I can see that the ChilliPro has a CAT5 shaped hole at the bottom of the unit.) Quote
K-Nine Posted February 15, 2007 Report Posted February 15, 2007 Sounds like the Chilli Master Controller could be what you are looking for ... CLICK HERE Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
qwells Posted February 15, 2007 Author Report Posted February 15, 2007 In order to place this controller on our tech balcony, what would we need (in addition) to install this? Presumably we would need to ask the guys who fitted the ChilliPro to come back. Quote
qwells Posted December 31, 2007 Author Report Posted December 31, 2007 We have our Chillipro2416i installed in a cupboard. In order to edit the memories, I have to squeeze myself in at an odd angle to look at the control panel. What are the options available to me (us) that would permit me to edit the memories away from the unit? This would be particularly useful, as it would enable me to see what the channels were doing at the same time. Regards Q Quote
Kirkup_xp Posted January 2, 2008 Report Posted January 2, 2008 You could use the Chilli Master Controller, or the Chillinet Master Touchscreen, which we launched at PLASA last year. Quote Peter Kirkup
qwells Posted January 12, 2008 Author Report Posted January 12, 2008 Who would be able to tell me what I (we) would need to connect this up - in addition to the unit itself? Quote
Kirkup_xp Posted January 14, 2008 Report Posted January 14, 2008 The Chilli Master Controller simply requires a CAN Bus feed which can be standard Cat5 cable connecting it to the dimmer. The Chillinet Master Touchscreen also requires a mains power feed. Quote Peter Kirkup
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.