chris_r Posted January 12, 2007 Report Share Posted January 12, 2007 Hi, I am looking to put together a rack of 3 betapacks, DMX splitter and Power distro in a rack, am I right in thinking the Betapacks are 4 units high? (Just to check before I order the wrong size rack!). Also What spacing would you recommend between betapacks? Thanks, Chris Edit to add yet another question (sorry!): The rack will go something like: [Top] Rack Drawer DMX Splitter Betapack 1 1U Vent Betapack 2 1U Vent Betapack 3 3U Vent - with power distro behind (At rear of rack) [bottom] The rest of the back will then be filled with blanking vents. How many Rack fans would you recommend for the 3 packs? Are there any fans you could recommend? Thanks again, Chris Quote Link to comment Share on other sites More sharing options...
KWR88 Posted May 9, 2008 Report Share Posted May 9, 2008 First you are correct the dimmers are 4U. If you only have three of them in the rack then you should not need to worry about forced cooling with fans. All the heat sync is at the rear if the dimmer you will need to leave the back of the dimmer rack clear of blank plates. The rack I have built up are in the format below. Splitter 1Uvent Dimmer 1 Dimmer 2 Dimmer 3 Distro. Quote Regards, Keith Rogers keith.rogers@signify.com DD: +44 (0) 1633 833 101. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.