Haytech Posted September 23, 2003 Report Posted September 23, 2003 Hello again, is it possible to chase brigtness channel of some fixtures ? - I used shutter before, but its not the same effect when fading. My desk works in partial mode. I want to realize a chase fading the brightness up and down ... Greetz Sebastian Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone
K-Nine Posted September 23, 2003 Report Posted September 23, 2003 Yes, you can have a brightness chase on a submaster. Record the chase memory and then transfer it onto a submaster. Note - that fixture brightness is HTP mixed from all sources which include the virtual faders, submasters and playback X. Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
pogo Posted September 23, 2003 Report Posted September 23, 2003 Yes, you can have a brightness chase on a submaster. Record the chase memory and then transfer it onto a submaster. Note - that fixture brightness is HTP mixed from all sources which include the virtual faders, submasters and playback X. As it's fixtures intensities you wish to chase, you have to remember that , when you record the chase, do not tag the fixtures (or un-tag them after bringing up the intensity, prior to recording a step). This allows you to only record the intensities, with no other information, allowing you to use this chase with any positional/beamshape/colour information you have stored in other subs. (Assuming there is no intensity information on these subs, or that you keep the level of the sub down so that the intensity level of the movement sub does not go higher than the chase intensities) Hope this makes sense! Quote
Haytech Posted November 3, 2003 Author Report Posted November 3, 2003 Thats it, Thank U - It works very fine ! I haven´t understand, that fixture brightness is stored anyway (tagged and untagged) before I have tried to store brightness by pressing brightness button It seemed to be wierd to get a chase without LTP data but now I know it and it´s great ! Thank U again :mrgreen: Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone
K-Nine Posted November 3, 2003 Report Posted November 3, 2003 If I may quote from the Frog Series Operating Manual, the book according to Memories, Chapter 4 Page 7 ... Partial Memories The output levels of generic and fixture brightness channels are always recorded regardless of the fixture tagging and attribute selection. To record only the brightness levels of fixtures, all fixtures must be untagged prior to pressing the PROGRAM button. 8) Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
Haytech Posted November 5, 2003 Author Report Posted November 5, 2003 Hello K-Nine, sometimes (late at night day before a tour) it´s hard to read a manual even if it is about a cool frog. :mrgreen: You are right if you think I didn´t read the manual intent. But now I will read it for sure ;-) Thanks for that grat desk and it´s precisely manual Sebastian Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone
K-Nine Posted November 5, 2003 Report Posted November 5, 2003 I take your point, it's just part of my ongoing campaign to encourage people to read the manual. It's amazing what valuable nuggets of information are contained in the various footnotes Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
lxkev Posted November 5, 2003 Report Posted November 5, 2003 us frog user have to bring a manual around with..... a long, long time ago, when zero88, were very good :-S they put a help button on sirus 250/500. the best bit was when you pressed it. it said "sorry help text, not availible" or sumut like that!! always made me laugh :wink: Quote I need a new job
Haytech Posted November 6, 2003 Author Report Posted November 6, 2003 Please don´t program a help function - this would cost to much memory - and I need every bit :mrgreen: Still reading the manual 8O Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone
K-Nine Posted November 6, 2003 Report Posted November 6, 2003 Stick with the manual .. you know it makes sense Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
lxkev Posted November 7, 2003 Report Posted November 7, 2003 Got to give it to you lot!!! You have got the best manual of any desk i've ever used!!! :lol Quote I need a new job
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.