samcoombes Posted July 10, 2006 Report Share Posted July 10, 2006 to make scrollers change nice and quietly, i need them to do this over 6 seconds or so. however, i also need another cue to happen whislt the scrollers are changing. can I overlap 2 cues? Quote Link to comment Share on other sites More sharing options...
Kirkup_xp Posted July 10, 2006 Report Share Posted July 10, 2006 Absolutely. Set a fade time of 6 seconds in the first cue. Trigger that cue, then trigger the next cue and both fades will be happening simultaneously. You may have problems if you want the second cue to be automatic, however, as the wait time applies once the cue has completed. Hope this helps Quote Peter Kirkup Link to comment Share on other sites More sharing options...
samcoombes Posted July 10, 2006 Author Report Share Posted July 10, 2006 thanks - so is it not possible to trigger the next cue automatically when the scrollers are say, half way through chaging? Quote Link to comment Share on other sites More sharing options...
Kirkup_xp Posted July 10, 2006 Report Share Posted July 10, 2006 You could always program the intermittant scroller state into the first cue (say, at frame 3 if they were going between frame 1 and frame 5) over 3 seconds, then program fram 5 in the second cue. That would do what you want Quote Peter Kirkup Link to comment Share on other sites More sharing options...
samcoombes Posted July 10, 2006 Author Report Share Posted July 10, 2006 indeed it would, thanks :-D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.