samcoombes Posted July 8, 2006 Report Posted July 8, 2006 right, i've got 8 of these, all in mode 6. according to the book of words, they automatically address themselves. to save time, I have them starting ffrom Channel 1, on universe 2. However, I can only seem to operate the 1st one in the chain... I've checked everything, all cables etc, and reset them and re-set up but to no avail. Any ideas? Thanks Quote
Kirkup_xp Posted July 9, 2006 Report Posted July 9, 2006 If the book of words says they self address, it sounds like a control issue - presumably they address sequentially from the start address. If you've patched the group (1 thru N @ 2/1) then this should be all that is required from the desk end. Try talking to AC Lighting support - they'll be able to check through the fixture specific things which may be going wrong. I've never used the fixtures myself so can't identify anything beyond the obvious. Quote Peter Kirkup
samcoombes Posted July 9, 2006 Author Report Posted July 9, 2006 what you said is exactly what I've done. I cant understand why they dont self address. i'll give tech support a ring in the morning - thanks. ;-) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.