Revenant Posted March 21, 2006 Report Posted March 21, 2006 hi everyone. i want to programm a simple Knight Rider chaser. when i programm a chaser with a few paar-light, i put the Ch.1 to 100% and press "programm" than i put it back to 0% and the Ch.2 to 100%, but the Ch.1 doesn't go to 0%, it means it is still 100%. when i start the chaser CH.1 goes up to 100% then CH.2 goes 100% but CH.1 doesnt go down to 0%. the problem is there was i time it worked, but now it works not. there are some chaser, and they look like they should, but these one i wuld programm now are working not. so it must be a user fault, but i don't no what i am doing wrong. PLS help me. Quote
K-Nine Posted March 21, 2006 Report Posted March 21, 2006 When you are programming a chase memory, ensure that the Playback X Master fader is at zero, otherwise you will be outputting the previously programmed step. When running the chase, remember to put the playback X master fader back to full. Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
Revenant Posted March 25, 2006 Author Report Posted March 25, 2006 thx, if it works, i will post now reply. mfg Rev from Ger Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.