lifex Posted February 22, 2006 Report Share Posted February 22, 2006 Hi @ all I'm searching for an fsoftware for the Coemar Pro Spot 250 Evo fixture. The newest libary only includes software for Pro Spot 250 LX. -has anyone the software for this partiuclar spot? -or can I use the other the one? I hope that anyone can help me thanks in advance ! greetz from germany lifex Quote Link to comment Share on other sites More sharing options...
Kirkup_xp Posted February 22, 2006 Report Share Posted February 22, 2006 Hi lifex I've created a fixture profile for the ProSpot250 Evo and added it to our main library, so it will be included with the next release. For now, please use the attached fixture profile. Let me know if you have any problems with the file. Quote Peter Kirkup Link to comment Share on other sites More sharing options...
lifex Posted February 22, 2006 Author Report Share Posted February 22, 2006 thank you very much! i hope it'll work properly! Quote Link to comment Share on other sites More sharing options...
K-Nine Posted February 22, 2006 Report Share Posted February 22, 2006 If Peter's created the file for you then there's a good chance it will Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace Link to comment Share on other sites More sharing options...
lifex Posted February 25, 2006 Author Report Share Posted February 25, 2006 Hi Kirkup unfortunately the fixture doesn'T work properly ! Pan/ Tilt work Dimmer also works Colour works but Beamshape ist not working the prisma effect doesn't wprk the other effects like gobo rot I couldn't check, because gobo function is not working. Maybe you can help me again, because tonight is the event, and i have to fix it ! I found an DMX addres sheet of the ProSpot 250 Evo http://www.coemar.it/cgi-bin/prodotti/docu...0Evo%20dmxE.pdf I hope you can help me !!! Quote Link to comment Share on other sites More sharing options...
Kirkup_xp Posted February 25, 2006 Report Share Posted February 25, 2006 Hi Lifex I've double checked the fixture profile I uploaded and it matches the DMX profile provided by Coemar. Are you using the fixture in 8 or 16 bit mode? In order to get the Prism to work, you need to set the FX1 channel to a value between 96 and 156, then set the Prism channel to rotate the prism. When you say that the gobo isnt working, what exactly are you doing to try and get the gobo into the beam. If you select the Gobo1<> parameter and wheel the value up, the gobos should enter the beam. To set the rotation and indexing, use the G1 <<>> parameter. Let me know if you're still having problems and i'll look into this in more detail. Its possible that the DMX profile on the Coemar website is wrong - we've had this experience before - in which case, it would be best for you to address the fixture to 1, and write down the control channels from the generic faders. I can customise the profile if you let me know the problem channels. Peter Quote Peter Kirkup Link to comment Share on other sites More sharing options...
lifex Posted February 25, 2006 Author Report Share Posted February 25, 2006 Hi Kirkup first of all I now change the desk from a leap frog to a fat frog. I'm using the spots in 16bit mode. The FX 1 works, but its some kind of a templates, with prism and beamshape +rotation... I'll let you know.... Quote Link to comment Share on other sites More sharing options...
Kirkup_xp Posted February 25, 2006 Report Share Posted February 25, 2006 FX1 should set the prism into the beam between 96 and 156, after which values it sets itsself into Macro mode, triggering various preset beam looks, as you describe. Quote Peter Kirkup Link to comment Share on other sites More sharing options...
lifex Posted February 26, 2006 Author Report Share Posted February 26, 2006 Now everything is working.....after 10 hours of trying everthing..... thank you very much for your help and you were right with FX1 functions..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.