dogcop Posted October 31, 2005 Report Share Posted October 31, 2005 First of all, this being my first real post on this esteemed forum, say thankyou for all the info contained on it. The posts have been really helpful as we have just taken delivery of our fat frog on friday and are currently trying to understand all the parameters. The advice has been top draw We are running the desk with 4 pearl rivers and 4 stairville 250's plus 20 par cans at our church. Here is the first of my conundrums. I programmed the desk in partial mode - selected my fixtures ok. Then programmed 4 memories just with my fixtures not generics 1- scene - all yellow wash 2 - scene - all red wash 3 - scene - all blue wash 4 - chase - various parameters I was able to work out the go function and snap function ok and scroll through the various mems all ok. Then while the chase on mem 4 was playing I selected the colour, gobo, and gobo rotation and changed the levels while the chase was in progress - again no probs it all changed. I then pressed "go" again, expecting to go back to mem 1 (the yellow wash) but the lights continued on the chase. Is this something to do with LTP and should I have done more at the initial programming stage. confused in Kent thanks again guys Andy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.