djwiltsh Posted October 3, 2005 Report Share Posted October 3, 2005 Hi there We have 3 mac 250 profiles and 2 mac 300 washes at my church (www.elimbristol.org) and a bullfrog desk. The problem is that the macs are powered from plug sockets in the rigging that are on dimmers, so if you do a blackout or take the grand master down, the macs lose power. When you take the blackout off, the macs are then reset as the power comes back on and there is the usual delay as they cool down so the lamps can restrike. (there are some faders on the desk that have to be up in order to have the macs on, these are obviously patched to the dimmer channels for those plug sockets). Is there any way of getting round this, short of programming the dimmers so that the mac sockets are always on, regardless of the dimmer control information they are receiving? Thanks Dan Quote Link to comment Share on other sites More sharing options...
samcoombes Posted October 3, 2005 Report Share Posted October 3, 2005 are you saying the macs are effectivley being 'dimmed' everytime you turn the master up or down??? I'd suggest getting proper power to them - these things don't like the power being dimmed!!!! Quote Link to comment Share on other sites More sharing options...
djwiltsh Posted October 3, 2005 Author Report Share Posted October 3, 2005 Unfortunately, all of the sockets in the roof are running off 2 dimmer racks so getting non-dimmed power up there is not an option. We don't tend to use the master fader to dim the lights anyway when the desk is in operation, it is either fully on or fully off, so the macs aren't getting consistently "dimmed" power. Is there something I can do at the desk end to stop isolate certain channels (the mac power channels) from the master and blackout? That way, you could do a blackout but those channels would still be outputting at 100%, thus the macs would stay on... Thanks Dan Quote Link to comment Share on other sites More sharing options...
ice Posted October 3, 2005 Report Share Posted October 3, 2005 Even if you output at 100%; running MAC's from a dimmer is NOT the way of powering those units. You can easily destroy the electrics in there, and I don't see why you can't provide some normal power up there. Just run an extra line and your problems are solved. Don't seek a solutions for problems which shouldn't be there in the first place. Quote > 500 posts, time for a new T-shirt? Link to comment Share on other sites More sharing options...
Kirkup_xp Posted October 3, 2005 Report Share Posted October 3, 2005 As others have said, running moving lights off of dimmers is a very bad idea. I'd suggest you run a hot power feed from somewhere to the movers. A simple 13A feed from a socket in the wall to the grid will do. Seriously, don't run movers from dimmers - its bad for them, and not recommended by the manufacturers. It can result in damage to both the movers and the dimmers. Quote Peter Kirkup Link to comment Share on other sites More sharing options...
djwiltsh Posted October 3, 2005 Author Report Share Posted October 3, 2005 OK I will see what I can do with regard to getting some non dimmed power in the roof... Thanks for the advice guys. Dan Quote Link to comment Share on other sites More sharing options...
Spotter Posted October 4, 2005 Report Share Posted October 4, 2005 Although I do very much agree with what is said below, in the meantime you could tape the Grand Master to 100%, and thus one won't be able to move it by accident Quote Link to comment Share on other sites More sharing options...
K-Nine Posted October 4, 2005 Report Share Posted October 4, 2005 Taping the Grand Master at 100% still won't prevent mischievous or clumsy fingers pressing the Blackout button though :evil: Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace Link to comment Share on other sites More sharing options...
Spotter Posted October 4, 2005 Report Share Posted October 4, 2005 Taping the Grand Master at 100% still won't prevent mischievous or clumsy fingers pressing the Blackout button though :evil: :oops: :oops: didn't even know there was one...... :oops: :oops: Quote Link to comment Share on other sites More sharing options...
Kresten Bager Posted October 4, 2005 Report Share Posted October 4, 2005 Rather than running a new power line up you could patch those channels to 230 V (if you dimmers have a hardware patch panel) Quote Kresten Bager Polyteknisk Scenelys www.scenelys.dk Link to comment Share on other sites More sharing options...
RW Posted January 27, 2006 Report Share Posted January 27, 2006 ? 8O ? "The problem is that the macs are powered from plug sockets in the rigging that are on dimmers" Who installed your lighting system!? I am amazed that your Macs, dimmers, local electric power station are all still working!! 8O I know it has been a while now, so is it all now resolved? Quote HARLOW COLLEGE Performing Arts. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.