Remembering chase parameters

[ice]

In the current situation it's possible to live edit the parameters of a chase, setting speed, direction, etc. But when you lower the fader (to temporarily stop an LTP chase for instance) all this information is lost and reset again. It would be a nice feature if the console would remember this data until something else is loaded onto the fader.

 

For instance; run a chase on P1-01, lower the fader to 0, go to page 2 to do something with fader 10, return to P1 again and restart the chase... the parameters would stay the same. Only if we would run something on P2-01 as well than the saved parameters would be lost and reset to their programmed values.