Jeff M. Posted June 25, 2003 Report Posted June 25, 2003 :cry: Power supply died for my Fat Frog. But didn't find out until setup at the gig. Help Zero 88... Quote
KWR88 Posted June 25, 2003 Report Posted June 25, 2003 Dear Sir, Where abouts in the country are you. We should be able to point you in the direction of the local dealer to get a replacement PSU. You may be better giving me a call direct on 01633 838 088. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com
almproductions Posted November 28, 2004 Report Posted November 28, 2004 Hopefully I will not get in trouble for posting this here but I can't seem to get anyone else to answer my plea for help. I have a fat frog that is not very old and the buttons are randomly falling off. I have contacted the U.S. distributor for Zero88 and they keep saying that they will get back with me about replacements and guess what.. Still waiting. I have also emailed Zero directly and never got a reply. Does anyone know where I can get replacement buttons? Sorry if this does not belong here but it is kind of hard to program with no buttons....... Quote
NZ Posted November 29, 2004 Report Posted November 29, 2004 Hi Jeff I am really sorry to hear about your problems. Please can you tell me who you have been talking to at ACT lighting. I will be contacting them and asking them to get in touch with you. This is I have to say most unlike them. Quote Graham
almproductions Posted November 29, 2004 Report Posted November 29, 2004 It has been so long ago that I do not remember. If you have any contact info for a certain person I will contact them directly. Any help is greatly appriciated! Thanks! Quote
NZ Posted November 29, 2004 Report Posted November 29, 2004 I have asked Mario to contact. He should be in touch later today bearing in mind they are in LA. Quote Graham
Tempiz Posted November 18, 2005 Report Posted November 18, 2005 Hi, i'm trying to get some advice in advance of going to an sos call tomorrow. The fat Frog i installed in a hotel 2 years ago is reportedly not powering up. from what i'm told, the fuse is ok in the plug to the power supply, and the mains outlet its plugged into is ok. there are no lights visible on the desk, and nothing on the screens. Any Ideas guys? Thanx, nick. p.s. I'm now a nurse, and haven't teched since i installed this 2 years ago! Quote
Paul Posted November 18, 2005 Report Posted November 18, 2005 Have you got a green light on the power supply? Does the floppy drive grunt when you switch the desk on? Have you metered the +5V and +12V out from the power supply? Have you checked the XLR4 connector on the power supply to make sure all the pins are still soldered fine? Is there anything on the external monitor? If you plug a keyboard in, is that powered? If you plug a desk light in, does that come on? There's plenty of things to try to help work out where in the system the problem is Quote
Frog Genius Posted May 6, 2006 Report Posted May 6, 2006 who/how can I get a replacement fader cap? The rubber bit came of Submaster 12, and I am looking for a new one. Quote
NZ Posted May 9, 2006 Report Posted May 9, 2006 You could contact your nearest Zero 88 dealer who will be able to sell you a spare. Northern Light and Blacklight would be your best bet. Quote Graham
Frog Genius Posted May 19, 2006 Report Posted May 19, 2006 yup, were ordering Follows, and Gaffa from them, ill add it to my shopping list (along with Bio-Hazzard tape) 8) Quote
a917917 Posted February 15, 2009 Report Posted February 15, 2009 HI GUYS, I NEED A NEW PSU FOR MY FAT FROG AND I NEED IT FOR TOMMORROW! - MONDAY 16TH FEBRUARY DOES ANYONE KNOW WHERE I CAN GET ONE!!! THANKS, EMAIL ME AT a917917@hotmail.com PLEASE A91719 Quote
Kirkup_xp Posted February 15, 2009 Report Posted February 15, 2009 Hi A91719 It would help if you could let us know where in the world you are. We hold these items in stock and so would be able to dispatch one for you tomorrow - give the sales team a call on 01633 838088 - or contact your local distributor (http://www.zero88.com/en/distributors) for stock information. I hope this helps, Quote Peter Kirkup
a917917 Posted February 15, 2009 Report Posted February 15, 2009 Im in High Wyombe, Buckingshamshire. United Kingdom. How much would it be for same day or next day delivery? Thanks, Alex Quote
Kirkup_xp Posted February 15, 2009 Report Posted February 15, 2009 Hi Alex I'd advise calling AC Lighting (based in High Wycombe) who will probably have a PSU in stock. They should be able to advise costs. Quote Peter Kirkup
a917917 Posted February 15, 2009 Report Posted February 15, 2009 If they dont can i call you guys and get one from you? Thanks, Alex Quote
Kirkup_xp Posted February 16, 2009 Report Posted February 16, 2009 Of course Alex - let us know how you get on, Regards, Quote Peter Kirkup
a917917 Posted February 21, 2009 Report Posted February 21, 2009 It arrived the shows going brilliantly and im so glad for peters help. Thankyou again, Alex Quote
X-Terminator Posted June 6, 2009 Report Posted June 6, 2009 Where can I get spare parts for my Mambo Frog? The Master Fader is dieing due to a liquid incident. It seems that the fader itself is an Alpha brand, 10K, dual fader type. Does the whole print need replacing or can the fader itself be desoldered & replaced. If so where can I find this fader and it's exact specifications? Is there another more easily fadertype to get? One that also fit's? (Perhaps an ALPS?) Since this is our only desk running the entire show sending it for service is almost impossible. This is one that needs to be done 'in-the-house' due to opening times etc... Thanks in advance. Quote
KWR88 Posted June 9, 2009 Report Posted June 9, 2009 If you can use a soldering iron or know some who can then it is possible to replace the fader if you take a little care. Unfortunatley I have found that most of the main (certainly UK) electronics suppliers have stopped doing the 10k linear fader that we are using... 4418000 10K Fader Lin 60mm (Alpha RA6044-201 085C1 B14 01G) It is a part that we still use on current desks so you should be able to pick this up from any of our dealers or even our sales dept direct. PM or email with your details and I will point you in the direction of somewhere to obtain one from. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com
pumphouse Posted August 10, 2009 Report Posted August 10, 2009 Hi, Someone somehow has managed to bend a couple of the faders on preset b of our BullFrog. One of them now doesn't work and I would like to replace them, so have a couble of questions: How can we get hold of a couple of replacment faders, and how much would they be? How easy are they to get at to replace (mechanical disassembly etc) How much would it cost to get them replaced at a repair agent? I'm very handy with a screwdriver and a soldering iron, but short of time! I would happily undertake it but don't want to open up the desk then find I need to do masses of disassembly just to get at the damn things! Any guidance gratefully received (PM if appropriate). Thanks and regards Jason Technical Director Pump House Theatre Quote
KWR88 Posted August 12, 2009 Report Posted August 12, 2009 If you can e-mail me direct on the the address below, with your address I will let you know who your closest repair agents are and give you more info on the desk if you wish to do it your self. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com
joshbailz Posted October 12, 2009 Report Posted October 12, 2009 I have a fat frog with a broken chase knob, a few dodgey faders, a dodgy GO button and its missing some fader knobs, the joys of working in a high school are just becoming apparent considering they have a show next week so need the parts for next thursday and also would be handy if you could get off an online shop so i can buy using schools credit card. any suggestions? Josh Quote
KWR88 Posted October 13, 2009 Report Posted October 13, 2009 Hi Josh, E-mail or give me a call on the on the address/number below will point you in the direction of your closest company to purchase from. Quote Regards, Keith Rogers Zero 88 Support: support@zero88.com
joshbailz Posted November 9, 2009 Report Posted November 9, 2009 Hi, I have been in touch with keith rogers from cooper controls regarding trying to get a new over-ride and chase knob, there was abit of confusion at first as i wanted the actual potentiometer that you solder into the board and not just the cover, i cannot get hold of Keith and have tried for the past couple of days, he did give me a part number last time i got in touch which was 4407400 which when i came to order i was told that it no longer exists? so i now need a new Over-ride potentiometer and a chase potentiometer ASAP can anyone help? thanks Josh Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.