GLX Posted July 26, 2005 Report Posted July 26, 2005 Has anybody out there got a simple way of controling stepper motors.(not via a frog). Ripped an old martin 218 non dmx unit apart for the duck of it and was wondering how would i be able to control the motors say to pan and tilt a video camera. Keep it simple. 8O Quote
Kirkup_xp Posted July 26, 2005 Report Posted July 26, 2005 Why not reassemble the control mechanism from the 218, but just for one (or two) channels. That way, you save having to find the correct chips and creating your own proprietry control system, when there is a perfectly good system sitting in pieces? Edit: Just seen, you say your 218 is non-DMX. What control system does it use? You can get protocol converters for DMX-Martin protocol, and of course, DMX-Analogue. If it doesn't accept an external input, then I guess i'm barking up the wrong tree. You may, however, be able to salvage some of the chips. Quote Peter Kirkup
GLX Posted July 27, 2005 Author Report Posted July 27, 2005 Its the old martin protocol, the board makes no sense to me. If the scan accepted dmx then no probs but I'm not spending money on a martin converter for a mess around project in the stores. Found it!! lets see who can build the next huge thing in lighting http://www.milinst.com/DMX/dmxtext.htm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.