_chris_ Posted July 17, 2005 Report Posted July 17, 2005 The power was cut, i tried to restart by plugging in again, but now the desk freeze during boot, all the lights are lit on the desk, and it doesn't accept update disks. What do i do....? PS, I've got about 1,5 hours until the show starts.... Quote
GLX Posted July 17, 2005 Report Posted July 17, 2005 Try plugging the desk into another mains supply, if power failed the outlet or circut may be damaged. Quote
Paul Posted July 18, 2005 Report Posted July 18, 2005 Hi Chris, What is displayed on the external monitor display while the desk is frozen, and when the software installation disk is in the drive? Regards, Paul. Quote
_chris_ Posted July 18, 2005 Author Report Posted July 18, 2005 10 minutes before the show started, and on the 20th (or so) attempt, the desk came back on, and worked flawless during the show. I tried to restart it afterwards, just to see if it was working again....which it wasn't. The monitor displays the normal data, the desk tries to find an upgrade disk, and if found, it reads and verifies the data on it. After that is done, the desk just freezes, and nothing more happens. Basically I haven't got a clue as to what happened, I wasn't saving/updating/running anything, the desk was just switched off as usual, and didn't come back on. According to Tech.Support at Zero88, it might be problem with the memory module...in any case, the desk is going back to the dealer to be checked out and fixed/replaced. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.