Jazzy Posted June 25, 2005 Report Posted June 25, 2005 Hi, I was rigging and programming for a show yesterday in a Church we do some work for and when I pluged in our DMX line on Output A and their's into Output B I found I had no control of their Dimmers or fixtures. I then noticed that the LED on Output B was not on. Now I know that they are in parallel and my dimmers and movers were working and everything adressed right so I swapped lines and now I had control of everything. I swapped them back and only control of my stuff. I swapped back and did what i needed to do and all seems to be alright, although the Led on Output B is still out. Any ideas? Quote
Paul Posted June 27, 2005 Report Posted June 27, 2005 The 2 outputs are not quite in parallel. They each have their own RS485 transceiver. Sounds very much like there may be a problem in one of the transceiver circuits. Get the board back to your dealer, they should be able to sort it out. Quote
Jazzy Posted June 28, 2005 Author Report Posted June 28, 2005 Hi Paul, I will send it back to our dealer Aquarius and get their tech to checkit out. Thanks. Jazzy. Quote
GLX Posted June 28, 2005 Report Posted June 28, 2005 By any chance was Speedy anywhere near the desk, he has the touch of death when it comes to lighting. 8O Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.