mistteam Posted April 30, 2005 Report Posted April 30, 2005 Hey, I've been working with the Fat Frog, which is the most complictated board ive used, so excuse me for any idiodic questions. I've assigned a High End Systems Color Pro fixture, but I can't seem to adjust the actual fixture with the wheels. The fixture itself is assigned to channels 25-30, which I can change the fixture with. Quote
K-Nine Posted April 30, 2005 Report Posted April 30, 2005 The 48 generic/dimmer/preset channels are patched by default to DMX channels 1-48. Fixtures should therefore be patched to DMX addresses 49 and above. Set the DMX start address on the fixture to something greater than 48 and patch the fixture on the desk accordingly. You should then be able to control the fixture's parameters using the control wheels. Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
NZ Posted May 3, 2005 Report Posted May 3, 2005 alternatively change the DMX patch on the generics to something else. Quote Graham
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.