nighteyes Posted April 20, 2005 Report Posted April 20, 2005 hi, this thing may be specific for my table only cause i think somethings wrong with it. On my fatfrog i have 2 dmx output connectors. On this dmx line i have: 3 dimpacks,,1 demux, 4 scans. When i plug the start of the line in first connector, all is well. However if i plug it in the other connector, all channels start flashing and some channels go to max output. Then if unplug the scans and the demux, everything works normal again. So are the dmx ouputs hardwired to each other, or is there something different about each? I reckon my problem has got something to do with signal strengths or something. Quote if one million people say a foolish thing, it is still a foolish thing.
K-Nine Posted April 20, 2005 Report Posted April 20, 2005 The DMX output from the two sockets should be identical. If they are not it sounds like there is possibly a problem with the DMX output board. Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
GLX Posted April 20, 2005 Report Posted April 20, 2005 Are your scans and dimmer packs pin 3 hot and pin 2 cold, if not this could be the source of your errors. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.