cherowbrier Posted March 3, 2005 Report Share Posted March 3, 2005 Exactly how do you assign fixtures. I've been into the superuser and assigned the fixtures I've got but at no point did it ask me the start address of each of the fixtures? So I thought ok, I'll make them do something and then look at the DMX output screen. Nothing was happening. The fixture preview screen said something was happening, but the DMX screen, nothing. Am I being utterly stupid. I've never had to assign the fixtures before, they've always been done before I arrive at a desk. Any help appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
Haytech Posted March 3, 2005 Report Share Posted March 3, 2005 Dear cherowbrier after assigning your fixtures go into superuser->desksetup->patchfunctions select "manual" then press first assigned fixturebutton the screen will jump onto f1= then push in via +/- or external keyboard the DMX start address of the unit go to the next fixt. and enter the DMX Start address of this unit and so on. see also p.58 of the manual Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone Link to comment Share on other sites More sharing options...
cherowbrier Posted March 4, 2005 Author Report Share Posted March 4, 2005 Brill. Thanks very much. Quote Link to comment Share on other sites More sharing options...
Haytech Posted March 4, 2005 Report Share Posted March 4, 2005 Null problemo Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.