Déplacement dans le noir

[jmd]

Bonjour,

Comment procéder avec des lyres mobile pour ne pas voir le déplacement du projecteur et du zoom ?

Il faudrait que qu'il se place dans le noir.

Merci 

[kgallen]

You need to be in tracking mode - or at least not using snapshot. If your intensity values are in white in the Output Window then you have programmed "blocking" cues which will stop move on dark from working.

If you programme with SmartTag then if a fixture is dark (intensity=0) in a cue and needs to reposition/re-gobo/re-zoom, then move on dark will do this automatically.

If you have programmed snapshots then you could change to tracking then use Update with SmartTag to un-block cues to allow MOD to work. There is also an UNBLOCK you can do on the whole cue-stack. However as with all such bulk changes you should check your programming afterwards, not on a live show!

If you are busking with playbacks then you can exploit the playback GO button to execute the move before you raise the fader for intensity, otherwise raising the fader will trigger the move etc as the intensity builds so you see the move etc. Other users here will be able to advise you better if you're busking.

There is this video:

 

 

[jmd]

Merci 👍je jette un œil sur la vidéo