RDM and ACN hardware ready

[Pipo]

Saw on the Z88-site that the Frog2 is RDM and ACN hardware ready.

 

I know what RTFM means , but what about RDM and ACN? :?:

[Kirkup_xp]

RDM - Remote Device Management. Means you can assign the DMX address, change fixture settings, etc, all remotely. This report (on the Wybron website) explains RDM well.

 

ACN - Advanced Control Network. An alternative to DMX, which can run over ethernet cabling. Multiple universes down one cable. It works by assigning each fixture an IP address instead of a DMX address, and thus much larger systems can be built from one output on the desk. This report (from ALIA) lays out ACN quite well.